11-15-2006 12:53 PM - edited 02-21-2020 02:43 PM
Hello Experts,
One quick question. How do I configure a Router to Router VPN with overlapping internal networks???
Both of my internal networks have ip address of 192.168.10.0 and 192.168.10.0
Any link or config will be appreciated. I've been looking but no luck.
Thanks,
Randall
Solved! Go to Solution.
11-15-2006 02:01 PM
Randall,
Please refer the below URL for configuration details:
Configuring an IPSec Tunnel Between Routers with Duplicate LAN Subnets
http://www.cisco.com/en/US/tech/tk583/tk372/technologies_configuration_example09186a00800b07ed.shtml
Let me know if it helps.
Regards,
Arul
** Please rate all helpful posts **
11-15-2006 02:01 PM
Randall,
Please refer the below URL for configuration details:
Configuring an IPSec Tunnel Between Routers with Duplicate LAN Subnets
http://www.cisco.com/en/US/tech/tk583/tk372/technologies_configuration_example09186a00800b07ed.shtml
Let me know if it helps.
Regards,
Arul
** Please rate all helpful posts **
11-16-2006 08:52 AM
Awesome Arul thanks for the link...It hit me after reading the link.....NAT before Crypto.
Appreciate the help!!!!
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide