Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
New Member

Router username

Dear all,

I want to create multiple usernames on same router with different privilages, sothat, some of them can only monitor without editing router configuration and other usernames can edit configuration.

And if i creat username, so, i can cancel VTY passowrd,

Thx for your help.

2 REPLIES

Re: Router username

Have a look at the use of role base access control

http://www.cisco.com/en/US/products/sw/secursw/ps5318/products_configuration_example09186a0080993ff0.shtml

or simply work with priviledge levels of access per usernames

http://www.cisco.com/en/US/docs/switches/lan/catalyst3560/software/release/12.2_50_se/configuration/guide/swauthen.html#wp1154063

under your vty you will need to add login local once you have created users

e.i

level 5 can issue show commands exept for show run or show start, no exec changes allowed.

username privilege 5 password

line vty 0 4

login local

line vty 5 15

login local

go over the link above to define provilege levels commands.

Regards

rate any helpful posts if helps

New Member

Re: Router username

Thx a lot, it is working

129
Views
0
Helpful
2
Replies
CreatePlease to create content