I have an issue with routing in PIX firewall. we have three DMZs in total. One DMZ for Public servers like proxy, web. Two DMZs are for a 3rd party server connection using Lease line. The problem lies in this 3rd pary area.
The communication with the 3rd party server is this way:
LAN--->DMZ1--->3rd party Router--->Server
LAN--->DMZ2--->3rd party Router--->Server
The server that both the DMZ refers to is the same. Does PIX allow adding two routes to the same destination.
Appreciate if any one could help on this urgent issue. Thanks in advance
Yes, there is an option for you. You can use a feature called static route tracking in conjunction with the two static routes that you have in place to address the problem of primary route not clearing when it's down. You need a code greater than 7.2(1)on your PIX for this to work.
Login to the FXOS chassis manager.
Direct your browser to https://hostname/, and log-in using the user-name and password.
Go to Help > About and check the current version:
Check the current version availa...
We have configured the outside and inside Interface with official ipv6 adresses, set a default route on outside Interface to our router, we also have definied a rule , which also gets hits, to permit tcp from inside Interface to any6.
In Syslog I also se...