Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Routing all traffic thorugh LAN-TO-LAN and VPN Concentrator

Hello,

I am trying to route all traffic (including Internet traffic) through a VPN connection from a remote office back to the main office using a 871 router to a 3000 Concentrator. The problem I have is in setting up the "local network" on the Concentrator. I have tried 0.0.0.0/0.0.0.0 but that does not transfer any traffic at all. The tunnel comes up, but no traffic is transferred. If I setup just the 2 networks then I can transfer between the 2 networks, but I want all Internet traffic, etc. to also go through the tunnel from the remote site (partly becuase there is a web filtering appliance at the home office.) Does anyone know how to do this with a Concentrator? Thank you.

1 REPLY
Cisco Employee

Re: Routing all traffic thorugh LAN-TO-LAN and VPN Concentrator

You need to use 0.0.0.0/255.255.255.255 for any address.

Please refer the below URL for details.

http://www.cisco.com/en/US/customer/docs/security/vpn3000/vpn3000_41/configuration/guide/polmgt.html#wp1112845

Regards,

Arul

101
Views
0
Helpful
1
Replies
CreatePlease login to create content