Routing between VPN IPSec tunnels on a PIX 515 (6.0)

[martap]

Hi everybody..

I have 3 sites (A, B, C) which are direct-connected to the central

PIX515 (A) over a ipsec tunnel. Remote clients can connect via

Cisco VPN Client 3.5.1 to the central Pix (A) . Now I have the problem

that the remote client should have access to the 2 sites (B and C) which

are connected only over the ipsec tunnel to site A. I can't get this to work.

I have 3 interfaces on the pix (A) and all ipsec traffic is terminated on

ONE interface, the outside interface.

In the Cisco documentation I couldn't find anything.

regards,

Marvin

[cjacinto]

The PIX would not redirect the same packet it receives on the same interface,

thus you could not do what you are after on one interface only on a PIX. You

would be able to do this on a router, but not on a PIX, unless you terminate

the tunnels on different interfaces.