Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Routing between VPN IPSec tunnels on a PIX 515 (6.0)

Hi everybody..

I have 3 sites (A, B, C) which are direct-connected to the central

PIX515 (A) over a ipsec tunnel. Remote clients can connect via

Cisco VPN Client 3.5.1 to the central Pix (A) . Now I have the problem

that the remote client should have access to the 2 sites (B and C) which

are connected only over the ipsec tunnel to site A. I can't get this to work.

I have 3 interfaces on the pix (A) and all ipsec traffic is terminated on

ONE interface, the outside interface.

In the Cisco documentation I couldn't find anything.

regards,

Marvin

1 REPLY
Cisco Employee

Re: Routing between VPN IPSec tunnels on a PIX 515 (6.0)

The PIX would not redirect the same packet it receives on the same interface,

thus you could not do what you are after on one interface only on a PIX. You

would be able to do this on a router, but not on a PIX, unless you terminate

the tunnels on different interfaces.

85
Views
0
Helpful
1
Replies
CreatePlease to create content