Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Community Member

Routing internet traffic to ADSL where using VPN; how-to?

I use VPN to connect to my work using ADSL.

When connected, I have:

Windows IP Configuration

Ethernet adapter Local Area Connection: <== ADSL Speedy

Connection-specific DNS Suffix . :

IP Address. . . . . . . . . . . . : 200.207.XXX.YYY

Subnet Mask . . . . . . . . . . . : 255.255.255.192

Default Gateway . . . . . . . . . : 200.207.XXX.YYY

Ethernet adapter Local Area Connection 2: <== VPN

Connection-specific DNS Suffix . :

IP Address. . . . . . . . . . . . : 148.97.XXX.YYY

Subnet Mask . . . . . . . . . . . : 255.255.0.0

Default Gateway . . . . . . . . . : 148.97.XXX.YYY

After VPN connection, all traffic is routed to VPN.

My question is: when connected with VPN, how to route internet traffic to my IP ADSL and acess to my business servers to VPN IP.

Because, I want use a clear internet (without proxies and blocked ports like SMTP, NNTP when working from my house.

Thanks in advance.

2 REPLIES
Community Member

Re: Routing internet traffic to ADSL where using VPN; how-to?

You would have to make sure and set-up a split tunnel configuration at the router end.

Basically the vpn client configratom group should have

"acl "

and access list should allow only traffic from the VPN client range to the LAN range.

eg

access-list 101 permit ip xxx.xxx.xxx.xxx 0.0.0.255 yyy.yyy.yyy.yyy 0.0.0.255

Gold

Re: Routing internet traffic to ADSL where using VPN; how-to?

just a quick comment.

the vpn pool is using public ip, which may introduce problem when the client browsing internet.

176
Views
0
Helpful
2
Replies
CreatePlease to create content