We are currently using a 3015 VPN concentrator on which we support access to two separate client subnets. I can't use a default tunnel gateway because I have two separate networks. I dont have a router behind the VPN box. I can ping a network that I have a LAN-to-LAN tunnel setup with from the client network but not from the other end. It seems as though the destination network doesn't know where to route ICMP replies back to. How can I route client traffic to the appropriate network? I already have static routes in the concentrator but they don't seemt to work for this LAN-to-LAN tunnel.
BenefitsDocumentationPrerequisiteImage Download LinksLimitationsSupported PlatformsLicense RequirementsTopologyStep-By-Step ConfigurationConfigure Virtual ServiceActivate the virtual service and configure guest IPsConfiguring UTD (Service Plane)Configurin...
Login to the FXOS chassis manager.
Direct your browser to https://hostname/, and log-in using the user-name and password.
Go to Help > About and check the current version:
Check the current version availa...
We have configured the outside and inside Interface with official ipv6 adresses, set a default route on outside Interface to our router, we also have definied a rule , which also gets hits, to permit tcp from inside Interface to any6.
In Syslog I also se...