I have a question about routing function in ASA 5500. scenario: The asa (inside int 192.168.1.1) acts default gateway for all inside nodes. We have also another network on the inside (192.168.2.0), can the asa route traffic to this net via only the inside interface (192.168.1.1) i know that the pix dose NOT support this routing scenario, will the asa do it??
Not sure if this will work for IP traffic !!! you can either create a seperate vlan on the PIX for this and route between interfaces or use some other layer 3 device to redirect the traffic... as Jacko said, this might work well for IPSEC traffic....
We have done this by using sub-interfaces, but assuming you have only the 192.168.1.x network connected to the ASA, you can add a static route to point 192.168 2.x packets to the router connecting the two interfaces.
Login to the FXOS chassis manager.
Direct your browser to https://hostname/, and log-in using the user-name and password.
Go to Help > About and check the current version:
Check the current version availa...
We have configured the outside and inside Interface with official ipv6 adresses, set a default route on outside Interface to our router, we also have definied a rule , which also gets hits, to permit tcp from inside Interface to any6.
In Syslog I also se...