I have set up ASA 5510 for our our network. It works fine for our network.
Now I need a way to set up the DMZ with public adresses.
The outside is a x.x.214.4 / 30 network, outside ASA ip is x.x.214.6.
For internal mail server, rd, ftp etc we have got a new network. This is y.y.251.192 / 29.
My problem is to get this working. I have some experience (MCSE), but my logic is not working with the ASA. Since it is ages since I have been programming Cisco through command line commands, i have only been using the ASDM.
Hope someone could help me. The traffic (web, mail, ftp etc) from inside (LAN) to outside is working fine. Also has problem getting traffic from DMZ to inside.
Outside security level is 0, dmz is 50, inside is 100. H E L P!
Login to the FXOS chassis manager.
Direct your browser to https://hostname/, and log-in using the user-name and password.
Go to Help > About and check the current version:
Check the current version availa...
We have configured the outside and inside Interface with official ipv6 adresses, set a default route on outside Interface to our router, we also have definied a rule , which also gets hits, to permit tcp from inside Interface to any6.
In Syslog I also se...