I am testing the implementation of two ASAs. 5510 has the IPS module the 5520 has the AntiX module. I currently have the 5510 sitting in front of the 5520. The 5510 is running in transparent mode. In my lab I can't ping, http, or ftp to one of my test servers sitting behind the 5520 with the 5510 in place. If I take the 5510 out of the equation all services work. Has anybody used two ASAs in this manner? If so how did you get it working?
If you have a remote-client configuration in which you are using two or more ASAs connected on the same network to handle remote sessions, you can configure those devices to share their session load. This feature is called load balancing. Load balancing directs session traffic to the least loaded device, thus distributing the load among all devices. It makes efficient use of system resources and provides high availability.
To implement load balancing, group together logically two or more devices on the same subnet into a virtual cluster
BenefitsDocumentationPrerequisiteImage Download LinksLimitationsSupported PlatformsLicense RequirementsTopologyStep-By-Step ConfigurationConfigure Virtual ServiceActivate the virtual service and configure guest IPsConfiguring UTD (Service Plane)Configurin...
Login to the FXOS chassis manager.
Direct your browser to https://hostname/, and log-in using the user-name and password.
Go to Help > About and check the current version:
Check the current version availa...
We have configured the outside and inside Interface with official ipv6 adresses, set a default route on outside Interface to our router, we also have definied a rule , which also gets hits, to permit tcp from inside Interface to any6.
In Syslog I also se...