I want to transfer the saved log on a VPN 3005 running code 3.5 to FTP server running on Windows 2000 server. Unfortunately it is not doing it though it is configured as required.
When I checked the log of the FTP server, it shows that VPN Concentrator is getting connected to the FTP server with the assigned username and password and is saving the file as "/log73456.txt", instead of "\log73456.txt".
It seems to a coding issue. How to set it right? Any one has a clue?
Is the ftp server on the same subnet as the inside? Could you make sure there is no intervening device btwn the conc and the ftp server? If you still feel it is a coding issue, provide a sniffer trace of the traffic to and from the ftp server to the TAC and they could investigate it further.
Table of ContentsIntroductionVersion HistoryPossible Future
UpdatesDocuments PurposeNAT Operation in ASA 8.3+ SectionsRule Types
Network Object NATTwice NAT / Manual NATRule Types used per SectionNAT
Types used with Twice NAT / Manual NAT and Network Obje...
Table of Contents Introduction:This document describes details on how
NAT-T works. Background: ESP encrypts all critical information,
encapsulating the entire inner TCP/UDP datagram within an ESP header.
ESP is an IP protocol in the same sense that TCP an...