Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

SDM upgrade

folks

i'm trying to upgrade the sdm on my 1841 via the update tool in the sdm but when trying to load onto the router the upload failed after it had removed the old sdm so now i can't get onto the router

anyone any suggestions how i can recover this?

thanks

1 ACCEPTED SOLUTION

Accepted Solutions
New Member

Re: SDM upgrade

Ok, so I'm really hoping you're able to access this device via ssh, or even telnet. If so, you'll be able to take care of this issue.

This is your how-to right here. There are several steps in the process, so take your time if you're not familiar with doing this.

http://www.cisco.com/en/US/products/sw/secursw/ps5318/prod_installation_guide09186a00803e4727.html

1 REPLY
New Member

Re: SDM upgrade

Ok, so I'm really hoping you're able to access this device via ssh, or even telnet. If so, you'll be able to take care of this issue.

This is your how-to right here. There are several steps in the process, so take your time if you're not familiar with doing this.

http://www.cisco.com/en/US/products/sw/secursw/ps5318/prod_installation_guide09186a00803e4727.html

120
Views
0
Helpful
1
Replies
CreatePlease to create content