Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Secondary public network on the outside interface

We have already a public address range configured on the outside interface (213.XX.YY.ZZ/29). Our provider has assigned us a new range of public addresses (62.XX.YY.ZZ/29).

How can i configure this on the PIX ?

PS : As far as i know, secondary addresses aren't possible!

1 ACCEPTED SOLUTION

Accepted Solutions
kl
New Member

Re: Secondary public network on the outside interface

Hi,

You do not need to configure anything on the PIX just make sure that your ISP is routing the new addresses to your PIX - Then you can use the new addresses to what you like.

Regards

Kim

2 REPLIES
kl
New Member

Re: Secondary public network on the outside interface

Hi,

You do not need to configure anything on the PIX just make sure that your ISP is routing the new addresses to your PIX - Then you can use the new addresses to what you like.

Regards

Kim

New Member

Re: Secondary public network on the outside interface

Of course ! You're right.

As i've got the default route on the PIX, I'm already done with the routing question.

It works, thanks for your help

103
Views
0
Helpful
2
Replies
CreatePlease login to create content