I know the PIX 5xx firewalls well enough and although I've read through all the docummentation on the FSM for the 6500, I still don't understand how it works.
I have 20+ VLANS with only 1 VLAN I need secured from the other 20 VLANs, but hosts on the 20+ user VLANS need to get to some various services on the Secure VLAN.
According to Documents I have to "set vlan 1-25 firewall-vlan 9" thus making all VLANS secured VLANS on the firewall! And that means that I cannot route VLANS on the MSFC because I get an error saying:
"15 are already defined and up on the MSFC. Cannot be secured".
So I'm thinking to secure just 1 VLAN from all other VLANs, all my VLAN routing must go through the firewall beacuse I cannot route the VLANs on the MSFC whic would negate the effectiveness of a MSFC.
Wouldn't I be better off with an external PIX device and keep my high-speed routing on the MSFC? or am I missing something here?
Login to the FXOS chassis manager.
Direct your browser to https://hostname/, and log-in using the user-name and password.
Go to Help > About and check the current version:
Check the current version availa...
We have configured the outside and inside Interface with official ipv6 adresses, set a default route on outside Interface to our router, we also have definied a rule , which also gets hits, to permit tcp from inside Interface to any6.
In Syslog I also se...