Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Community Member

Show ver on 520 doesn't show megs of flash

I do a show version and I don't see the amount of flash.

We have 4.4 which according to Cisco is 20mb of flash...but I have found their documentation cannot always be trusted.

I need to upgrade to 6.2 but definitely need 20mb.

Is there a hidden command I can use?

Thanks,

Jim Cornelson

1 REPLY
Cisco Employee

Re: Show ver on 520 doesn't show megs of flash

In version 4.4, you won't be able to see the flash in meg, your output will have something as follows;

Hardware: PIX-515, 64 MB RAM, CPU Pentium 200 MHz

Flash i28F640J5 @ 0x300

BIOS Flash AT29C257 @ 0xfffd8000

Flash i28F640J5 = 16 MB

^^^^^^^^^^^

you can determine how much flash you have with the following table;

i28F020 512 KB

AT29C040A 2 MB

atmel 2 MB

i28F640J5 8 MB - PIX 506

16 MB - all other PIXes

strata 16 MB

http://www.cisco.com/warp/customer/110/pixfaq.shtml#Q22

HTH

R/Yusuf

96
Views
0
Helpful
1
Replies
CreatePlease to create content