When I protect a network(184.108.40.206/26), I open Device Management. Click Devices > Add,add a network protecting in front of the router with the Telnet and enable passwords (220.127.116.11) , I Click Shunning > Add and select srit-sensor-1 , then open the Intrusion Detection window, and click Protected Networks. Add the range 18.104.22.168 to 22.214.171.124 into the protected network, and click logging ip, add 126.96.36.199/26; then
Add source data (188.8.131.52/26),but access-list is wrong router configure :
ip address 184.108.40.206 255.255.255.192
ip access-group IDS_ethernet0/0_in_0 in
no ip directed-broadcast
ip ospf priority 0
ip access-list extended IDS_ethernet0/0_in_0
deny ip 220.127.116.11 0.0.0.63 any log
permit ip any any
now I can not telnet and ping the router, I think access-list of router :
Login to the FXOS chassis manager.
Direct your browser to https://hostname/, and log-in using the user-name and password.
Go to Help > About and check the current version:
Check the current version availa...
We have configured the outside and inside Interface with official ipv6 adresses, set a default route on outside Interface to our router, we also have definied a rule , which also gets hits, to permit tcp from inside Interface to any6.
In Syslog I also se...