Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
New Member

simple syslog question

All,

I am not a pix admin but am trying my best. I have a windows 2000 syslog server setup and would like to capture logs from my pix. I have went into conf t and typed the following:

hgg_firewall1(config)# logging host inside 10.5.4.12 udp/514

The response I get back is:

Port out of range: 1025-65535.

So what am I doing wrong?

Thanks

2 REPLIES
Cisco Employee

Re: simple syslog question

Michael, for Syslog on the default UDP=514 use the command:

hgg_firewall1(config)# logging host inside 10.5.4.12

If you enter a port , other than default 514, it must be in the range 1025-65535.

Here's a link on PIX logging:

http://www.cisco.com/univercd/cc/td/doc/product/iaabu/pix/pix_62/cmdref/gl.htm#xtocid15

Hope this helps,

Nelson

New Member

Re: simple syslog question

Thanks Nelson

97
Views
0
Helpful
2
Replies
CreatePlease to create content