I'm interested in setting up a VPN for a satellite office and possibly a couple of remote users. I currently have a Cisco 1720 router in the main office and I'm using a Cisco 675 in the satellite office. I know I'm going to need a Cisco 1400 series router for the satellite but I'm not sure if there is anything else I should consider or think about before persuing this route and buying some equipment. I'm using Linux servers and have Win clients if that makes a difference in the approach I should take.
The site-to-site 1700 to 1400 tunnel is ideal for a small environment. If you are looking at adding remote users in the future or expanding at the headquarters, you might consider moving the 1700 to the remote office and putting in a 3600 at your headquarters. Hope this Helps!
Table of ContentsIntroductionVersion HistoryPossible Future
UpdatesDocuments PurposeNAT Operation in ASA 8.3+ SectionsRule Types
Network Object NATTwice NAT / Manual NATRule Types used per SectionNAT
Types used with Twice NAT / Manual NAT and Network Obje...
Table of Contents Introduction:This document describes details on how
NAT-T works. Background: ESP encrypts all critical information,
encapsulating the entire inner TCP/UDP datagram within an ESP header.
ESP is an IP protocol in the same sense that TCP an...