cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
322
Views
5
Helpful
3
Replies

site-to-site VPN & Client on the same Router

abuatiya
Level 1
Level 1

hello,

i'm running site-to-site VPN and VPN Client on the same router 3845.

The remote site of site-to-site has dynamic IP address through the ISP provider, I configure the VPN tunnel and the client config .

The site-to-site could establish the communication untill i remove the below line from the router config and put it back.

( crypto map to_dubai_map client authentication list sdm_vpn_xauth_ml_2)

The connection will remain up for some time then dropped again.

Or:

when i add no-xauth to peer as the below

crypto isakmp key XXXXXXX address 0.0.0.0 0.0.0.0 no-xauth

but when i add no-xauth the remote VPN client could not login or establish the connection.

Im attaching the config . Your help will be appreciated

3 Replies 3

abuatiya
Level 1
Level 1

Hello ,

ANY UPDATE !!! ???????

Hi,

You have to configure isakmp profiles in this scenario. Here's the doc :

http://cisco.com/en/US/tech/tk583/tk372/technologies_configuration_example09186a00801dddbb.shtml

HTH,

-Kanishka

Kanishka,

I had the same problem as the initial post and this fixed it for me!

thanks

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: