Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
New Member

Site-To-Site VPN logs

Hi,

We have a Site-To-Site VPN between Cisco VPN 3000 Concentrator Version 4.7 and Cisco Pix 501 setup.

I configured the 192.168.250.0 as the local proxy server and 192.168.73.0 as the remote proxy server in VPN concentrator. This VPN concentrator only prints the connection establish & termination[Enable/Disable] logs in the log file.

I would like to identify the traffic across those two networks using the VPN concentrator logs. Is there any configuration needs to be done to print the traffic logs in VPN concentrator logs?

Please guide me in getting things done.

Thanks.

3 REPLIES
Cisco Employee

Re: Site-To-Site VPN logs

Hello,

VPN concentrator can only send messages for the IKE, IPSEC session establishment, tear-down or problem when establishing a tunnel, etc...

There isn't any filter in the VPN concentrator itself to specifically find out what kind of traffic goes through this tunnel.

Thanks

Gilbert

- Let me know if it helps -

New Member

Re: Site-To-Site VPN logs

Hi Gilbert,

Thank you for your prompt reply. Yes! your advice confirmed my doubt. I have tested it in my environment and is confirmed. I would like to close this thread.

Thanks.

Saran

Cisco Employee

Re: Site-To-Site VPN logs

Saran,

Good to know.

Thanks

Gilbert

Rate this post, if it helped.

203
Views
0
Helpful
3
Replies
CreatePlease to create content