Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

SITE to SITE VPN printing issues to HP printer

I have a 3 site SITE-SITE VPN with one sitting as the hub and the remotes accessing each other through the hub. My problem is, one of the hubs can print to the core, but when attempting to print to the other spoke, the document hangs in the queue and won't print. We can ping fine, get files and all, but prinitng Via the windows 2000 tcpip port dies. Any ideas?

thanks,

Aaron

1 REPLY
New Member

Re: SITE to SITE VPN printing issues to HP printer

What devices are you using for vpn? Sounds like maybe a fragmentation issue. If your using IOS you can run "debug ip icmp" at try printing again. What we are looking for is a mtu issue. You can adjust the mtu on the server or depending on your IOS version. Here's a link that might help: http://www.cisco.com/warp/public/105/pmtud_ipfrag.html

Kurtis Durrett

381
Views
0
Helpful
1
Replies