Re: Site to Site VPN: Testing PIX 515 with PIX 501
No problem, do it all the time in the lab here. Routing is probably your issue, just make sure the default gateway on each PIX is the other PIX's IP address, or at the very least add a route for the 10.10.x.0 network on each PIX pointing to the other PIX (where x is 10 on the 515 and 20 on the 501)
Login to the FXOS chassis manager.
Direct your browser to https://hostname/, and log-in using the user-name and password.
Go to Help > About and check the current version:
Check the current version availa...
We have configured the outside and inside Interface with official ipv6 adresses, set a default route on outside Interface to our router, we also have definied a rule , which also gets hits, to permit tcp from inside Interface to any6.
In Syslog I also se...