I am looking for some information on how to configure a site-to-site vpn connection using the pix 515 and the 1841 router. I have a remote site that I would like to connect to the corporate office via DSL modem. If anyone could give some assistance this would be very helpful.
Thanks; I need to give a little more information. The 1841 router will be located at the remote site with the DSL modem and the PIX is located at the corporate office. I am looking for some information on configuring the 1841 router for the remote site and configuring the PIX515 to accept the connection from the remote site.
Table of ContentsIntroductionVersion HistoryPossible Future
UpdatesDocuments PurposeNAT Operation in ASA 8.3+ SectionsRule Types
Network Object NATTwice NAT / Manual NATRule Types used per SectionNAT
Types used with Twice NAT / Manual NAT and Network Obje...
Table of Contents Introduction:This document describes details on how
NAT-T works. Background: ESP encrypts all critical information,
encapsulating the entire inner TCP/UDP datagram within an ESP header.
ESP is an IP protocol in the same sense that TCP an...