cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
223
Views
0
Helpful
1
Replies

site to site vpn with Dr site access

rajbhatt
Level 3
Level 3

site M (1.1.1.1)LAN

|

LAN(2.2.2.2)Site B #--------# (DR site) Site C LAN static nat 3.3.3.3-----2.2.2.2

End point ips of sites M : 192.168.6.2 site B 192.168.7.2 site C : 192.168.8.2

Site B and site C does not need to talk to each other

Site C and M will have a tunnel will work only in case site b goes down

MY site M is will have a site to site vpn conenction to site B .

In case site B goes down , site M should conenct to Site C ( which has a static nat to site B's lan ip)

How can I configure the above setup ?

How will site M detect that Site B is down and communicate with Site C automatically.

Could some one give an sample config for this vpn configuration on site M,site B and Site C

Site M and Site B has no nat statements .

Thanks in advance

Raj

1 Reply 1

rajbhatt
Level 3
Level 3

HI,

Any one has any leads on this.

We do have a cisco website with hub and spoke access but that does not work as a DR site

Raj