cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
331
Views
0
Helpful
1
Replies

Site to Site VPN with Dynamic IP

Kaoch0824
Level 1
Level 1

Currently we have ASA 5510 in place and would like to establish a VPN tunnel to Cisco 877 router. Being that is the case, the 877 router has dynamic IP. Is there a secure and recommended way to configure and establish a hard VPN tunnel between 5510 and 877 Router Branch Office Router?

Thanks!

1 Reply 1

dgroscost
Level 4
Level 4

You can do this, but only the Cisco 877 router (being dynamic) can bring up the tunnel, as the ASA has no way of knowing the IP of the other endpoint. I have a few of these set up in my environment.

You'll need to set configuration lines to the DefaultL2LGroup tunnel-group.

Direct link: http://www.cisco.com/en/US/products/ps6120/products_configuration_example09186a00805733df.shtml

PIX-to-PIX Dynamic-to-Static IPSec.

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: