We have a new MPLS connection using two Cisco 2801 routers. We need to pass netbeui packets between main office and the remote location. My thought was to use the VPN capability of the 2801s and a protocol such as IPSEC or GRE. There are only 4 IP based systems and 3 Netbeui based devices at the remote location. The main office has Windows 2003 servers with IP and Netbeui protocols in place. Currently we are using a frame relay to communicate between the sites. I am not 100% sure if the 2801s can do this and if they can what ios would they need.
Table of ContentsIntroductionVersion HistoryPossible Future
UpdatesDocuments PurposeNAT Operation in ASA 8.3+ SectionsRule Types
Network Object NATTwice NAT / Manual NATRule Types used per SectionNAT
Types used with Twice NAT / Manual NAT and Network Obje...
Table of Contents Introduction:This document describes details on how
NAT-T works. Background: ESP encrypts all critical information,
encapsulating the entire inner TCP/UDP datagram within an ESP header.
ESP is an IP protocol in the same sense that TCP an...