I'm setting up a site to site, and have followed the instructions from the Cisco site. Phase I completes, and the other concentrator connects. Then Phase II repeats itself about 10 times and then disconnects. Each time the entire process lasts 24 seconds. Anyone have any ideas? Here is a copy of the log from the local concentrator:
QM FSM stands for Quick Mode Finite State Machine. The encryption process consists of as a number of "finite state machines" where each FSM accepts input from the previous FSM. The error encountered could be due to a number of reasons and the error message by itself doesn't shed much light on the likely cause. I would suggest rechecking your configuration and looking out for bugs associated with your software.
Login to the FXOS chassis manager.
Direct your browser to https://hostname/, and log-in using the user-name and password.
Go to Help > About and check the current version:
Check the current version availa...
We have configured the outside and inside Interface with official ipv6 adresses, set a default route on outside Interface to our router, we also have definied a rule , which also gets hits, to permit tcp from inside Interface to any6.
In Syslog I also se...