i'm trying to configure SNMP on an ACS appliance(System configuration => Appliance configuration => SNMP agent). There is also an option "accept SNMP packets from selected hosts". When i enter an IP adress in the "Host Address" field, i receive the following error:
One or more IP addresses are invalid. Use a (,) as a delimiter between IP's. Wildcards are not allowed.
The ip address i'm entering is just in the xxx.xxx.xxx.xxx format. Also tried 2 addresses, with a comma as delimiter, but still the same error.
Has anyone expierenced the same error on an appliance? The software version i'm using is 4.1.4-13
Table of ContentsIntroductionVersion HistoryPossible Future
UpdatesDocuments PurposeNAT Operation in ASA 8.3+ SectionsRule Types
Network Object NATTwice NAT / Manual NATRule Types used per SectionNAT
Types used with Twice NAT / Manual NAT and Network Obje...
Table of Contents Introduction:This document describes details on how
NAT-T works. Background: ESP encrypts all critical information,
encapsulating the entire inner TCP/UDP datagram within an ESP header.
ESP is an IP protocol in the same sense that TCP an...