Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Community Member

solarWinds can't read PIX oid?

I hvae a PIX 525, config as follows:

no snmp-server location

no snmp-server contact

snmp-server community public

snmp-server host dmz 192.192.192.10( my collecting server in DMZ zone,ip address is 192.192.192.10)

no snmp-server enable traps

OID£º1.3.6.1.4.1.9.9.109.1.1.1.1.5

OID NAME£ºcpmCpuTotal5MinRev

or:

Object cpmProcExtUtil5MinRev

OID 1.3.6.1.4.1.9.9.109.1.2.3.1.7

when i search above oid,the response is unsupported oid

4 REPLIES
Bronze

Re: solarWinds can't read PIX oid?

You could try checking if OS you are using supports the said MIB using the document at http://www.cisco.com/en/US/partner/products/hw/vpndevc/ps2030/products_tech_note09186a0080094a13.shtml#mibsupportbyversion. A list of MIBS supported on Cisco products is available at http://www.cisco.com/public/sw-center/netmgmt/cmtk/mibs.shtml

For more information on PIX SNMP configuration, please refer to http://www.cisco.com/en/US/products/hw/vpndevc/ps2030/products_tech_note09186a0080094a13.shtml

Community Member

Re: solarWinds can't read PIX oid?

hi, isivulka

thank for your helpful doc information.

My PIX 535 version 6.3.1

when i use solarwind to view pix oid

1.3.6.1.4.1.9.9.109.1.2.3.1.7(about pix cpu 5mins avilablity rate)

when i use solarwind to view pix oid 1.3.6.1.4.1.9.9.109.1

the responses are pix cpu rate about 5s,1min and 5mins. Is my solarwind BUG?

Community Member

Re: solarWinds can't read PIX oid?

when i use solarwind to view pix oid

1.3.6.1.4.1.9.9.109.1.2.3.1.7(about pix cpu 5mins avilablity rate)

the response is unsupported.

Community Member

Re: solarWinds can't read PIX oid?

Have you performed a MIB walk in Solarwinds? I believe that will tell you what MIBs are available from the device.

MIBwalk of 501 (I am at home)on the 501 I can access the following OIDs

CISCO-PROCESS-MIB 1.3.6.1.4.1.9.9.109.1.1.1.1.2.1 cpmCPUTotalPhysicalIndex.1 0

CISCO-PROCESS-MIB 1.3.6.1.4.1.9.9.109.1.1.1.1.3.1 cpmCPUTotal5sec.1 0

CISCO-PROCESS-MIB 1.3.6.1.4.1.9.9.109.1.1.1.1.4.1 cpmCPUTotal1min.1 0

CISCO-PROCESS-MIB 1.3.6.1.4.1.9.9.109.1.1.1.1.5.1 cpmCPUTotal5min.1 0

I looked at MIBs on Solarwinds and 1.3.6.1.4.1.9.9.109.1.2.3.1.7 is included in their MIB database

HTH

126
Views
9
Helpful
4
Replies
CreatePlease to create content