1st I had the routing issue which I corrected on the router and was able to ping when I removed the split tunnel command. Then when I add the split tunnel command the ACL 101's networks show up in the client but with no key and I can no longer Ping. I can get to the outside though.
PIX Version 6.2(1)
access-list 101 permit ip 10.252.0.0 255.255.0.0 10.11.0.0 255.255.0.0
access-list 101 permit ip 10.1.0.0 255.255.0.0 10.11.0.0 255.255.0.0
access-list 101 permit ip 10.3.0.0 255.255.0.0 10.11.0.0 255.255.0.0
You might want to try and use two access lists one for the nat and one for split tunneling. I have found using a pix for vpn. creating multiple access list works best. keep 101 for your nat statement. Then use 102 possibly for split tunneling
Login to the FXOS chassis manager.
Direct your browser to https://hostname/, and log-in using the user-name and password.
Go to Help > About and check the current version:
Check the current version availa...
We have configured the outside and inside Interface with official ipv6 adresses, set a default route on outside Interface to our router, we also have definied a rule , which also gets hits, to permit tcp from inside Interface to any6.
In Syslog I also se...