Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

Split tunneling via VPNgorups

How do I set up a split tunnel that allows my VPN users to access the internet as well as VPN into the PIX?

If I have two access lists, one for access to the DMZ and one for access to the internal network, set up for these remote users, which access list do I define for split tunneling?

1 REPLY
New Member

Re: Split tunneling via VPNgorups

You'd want to use the 'vpngroup split-tunnel' command on the PIX, which is available in 6.1. See http://www.cisco.com/univercd/cc/td/doc/product/iaabu/pix/pix_61/cmd_ref/tz.htm#xtocid10 for the details.

You'd also probably just need one access list, since all the ACL is really doing is defining what traffic should be sent across the tunnel.

82
Views
0
Helpful
1
Replies