Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

split tunneling vs 3005 concentrator

Hi,

I want to enable split tunneling with allowing network in list to bypass tunnel with the default client local lan access in one of the group configure created on the unit. But the allowing network... box remains grayed out?

any ideas?

regards, Yves Daigneaut.

3 REPLIES
Cisco Employee

Re: split tunneling vs 3005 concentrator

Hi,

Have you checked the option Tunnel Everything and then tried to configure "Allow the networks in list to bypass the tunnel". If this is the case, then the option should not be grayed out.

In an Allow Networks in List to Bypass Tunnel configuration, The IPSec client uses the network list as an exclusion list: a list of addresses to which traffic should be sent in the clear. All other traffic is routed over the IPSec tunnel.

Regards,

Arul

New Member

Re: split tunneling vs 3005 concentrator

Hi Arul,

yes I did, I opened a case with the TAC and it seems to be a corrupted config file... They will try to reproduce the problem in their lab...

thanks, Yves.

Cisco Employee

Re: split tunneling vs 3005 concentrator

Hi,

If you dont mind, keep the group updated with the solution provided by TAC.

Regards,

Arul

100
Views
0
Helpful
3
Replies
CreatePlease login to create content