spoke-to-spoke limitations in DMVPN

[eclaereboudt]

Hi,

I would like to know if there's a way to mix point-to-point spokes and multipoint spokes in one DMVPN cloud.

We would have 1 HUB, several spokes who only need to talk with the hub, and some spokes who may need to talk to other spokes. All spokes would be configured as multipoint. Is there a way to limit the multipoint spokes to make connections to the "point-to-point" spokes ?

thx

elke

[sbilgi]

Yes, you can do it by removing related ACL for the concern spokes

http://www.cisco.com/en/US/tech/tk583/tk372/technologies_configuration_example09186a0080093dc8.shtml

[eclaereboudt]

thx for the answer, but the link you send isn't speaking of DMVPN