10-27-2003 09:08 AM - edited 03-09-2019 05:18 AM
I am trying to get our CiscoWorks to manage a PIX 520 firewall running ver 6.3.3. It seems to get SNMP information but getting and managing the configs has been a problem. When I look in the PIX log I see this message: INFO %PIX-6-315011: SSH session from 10.80.134.21 on interface inside for user "manage" disconnected by SSH server, reason: "packet CRC check failed" (0x02).
The session gets set up but then it gets dropped.
I can't find any information on pix message 315011. I can ssh into the pix using putty just fine. Can Ciscoworks even do this?
Thanks,
Steve
10-27-2003 04:29 PM
I found this:
CRC check failed - The CRC value computed for a particular packet does not match the CRC value embedded in the packet; the packet is bad - No action required. If this message persists, call customer support.
Perhaps your ciscoworks box is creating bad packets ? Can you SSH from the same box, or sniff the traffic and capture the packets (look at the CRC's)?
Just some thoughts..
10-28-2003 05:55 AM
Can you give a try to regenerate the SSH keys.
Here is the link
Thanks
Nadeem
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: