01-16-2007 11:27 AM - edited 03-09-2019 05:13 PM
It was pretty simple to enable ssh on the pix, but it seems different on the catalyst. What is the command or commands structure for enabling on the catalyst 4503. Thanks for any help, RT
01-16-2007 12:07 PM
Switch(config)#hostname SwitchOne
SwitchOne(config)#ip domain-name mydomain.com
SwitchOne(config)#crypto key generate rsa
Enter modulus: 1024
SwitchOne(config)#ip ssh time-out 60
SwitchOne(config)#ip ssh authentication-retries 2
SwitchOne(config)#line vty 0 4
SwitchOne(config-line)#transport input ssh
SwitchOne(config-line)#end
SwitchOne#write memory
HTH and please rate.
01-17-2007 08:20 PM
Make sure you are using an IOS version that supports ssh. If the commands the other person posted aren't showing then you aren't using a version that supports ssh.
I'm talking specifically the crypto command...not showing.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide