I have ssl vpn with anyconnect working through an ASA. I need to change the default gateway that the client picks up after connecting, but can't find where to make the change. I can't even find where it is getting the current default gateway. Can anyone point me in the right direction?
Agree with Andrew, DG is something you cannot change as it is virtualy assigned, unless indicated by Andrew.
Where is the tunnel terminated at inside, outside interfaces? I suspect you are probably using Webvpn Pool IP range scheme as an already used subnet from inside where your DC resides, if this is the case use a different private IP network for WebVPN tunnel group.
The tunnel is terminated on the outside interface. I am using a webvpn ip pool that is part of our internal subnet. I need to be able to point to an internal gateway that can direct traffic to all parts of our internal network.
Login to the FXOS chassis manager.
Direct your browser to https://hostname/, and log-in using the user-name and password.
Go to Help > About and check the current version:
Check the current version availa...
We have configured the outside and inside Interface with official ipv6 adresses, set a default route on outside Interface to our router, we also have definied a rule , which also gets hits, to permit tcp from inside Interface to any6.
In Syslog I also se...