Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

Static IP Addressing to PIX VPN remote access client by ACS

I have configured a PIX 515 (6.1) with remote access VPN (PPTP at the moment)with ACS 2.6 (RADIUS) authentication.

I'm using a PIX local pool:

"vpdn group 1 client configuration address local poolvpn"

but i need to release a static IP address from ACS user setup.

Is there a way to configure the PIX without local pool?

Thanks

2 REPLIES
Bronze

Re: Static IP Addressing to PIX VPN remote access client by ACS

Hi..

Pix only supports local ip address assignment. There are no authorization commands for PPTP

Jazib

New Member

Re: Static IP Addressing to PIX VPN remote access client by ACS

Thanks Jazib.

Stefano

148
Views
0
Helpful
2
Replies