ASA/PIX with 2 interfaces, Outside and Inside. Web Server real ip is 10.1.1.88 and the outside static nat ip is 22.214.171.124.
So to allow user to access this web server from Internet, the access-list will be as below that apply to Outside interface.
access-list acl_out permit tcp any 126.96.36.199 eq wwww
How about this access-list , does user able to access web server ?
access-list acl_out permit tcp any 10.1.1.88 eq wwww
My question is related to the using object-group to configure access-list and static NAT the inside ip to multiple interfaces. If only the first access-list will work then when we create access-list we need to name the same server to multiple name refer to NATed ip of each interface.
Login to the FXOS chassis manager.
Direct your browser to https://hostname/, and log-in using the user-name and password.
Go to Help > About and check the current version:
Check the current version availa...
We have configured the outside and inside Interface with official ipv6 adresses, set a default route on outside Interface to our router, we also have definied a rule , which also gets hits, to permit tcp from inside Interface to any6.
In Syslog I also se...