09-29-2006 08:34 AM - edited 03-09-2019 04:21 PM
I have Cisco 2600.
serial interface on Public IP and outsite nat enabled
ethernet Interface with Private Ip and Inside NAT Enabled.
I have mapped my LAN machines with the Public IP using Static Nat enteries.
If i try to ping to machines from outside world. i recieve the ping reply,
But I can Telnet any machines with in my network.
No access list applied on my network.
Any suggestions.....
Thanks in advance
Asif
09-29-2006 12:22 PM
Asif,
If you are able to ping the servers from outside, then the IP Connectivity looks good.
Since there are no access-list applied on the interface, can you make sure that the servers are enabled for telnet services.
Let me know if it helps.
Regards,
Arul
09-29-2006 10:53 PM
Arul,
Thanks for reply.
I can access all my machines from with in the LAN,telnet etc.
When i do traceroute from outside world. traceroute stucks at the router where i have applied NAT.
------------------
Here is copy of my Running config
-----output suppressed------
!
controller E1 0/0
channel-group 1 timeslots 1-31
!
!
interface Ethernet0/0
description "LAN Connection"
ip address 10.170.10.200 255.255.255.0
ip nat inside
full-duplex
!
interface Serial0/0:1
ip address 202.125.147.65 255.255.255.252
ip nat outside
!
!
ip nat inside source static 10.170.10.254 202.125.148.129
ip nat inside source static 10.170.11.254 202.125.148.130
no ip http server
ip classless
ip route 0.0.0.0 0.0.0.0 202.125.147.66
ip route 10.0.0.0 255.255.255.0 10.170.10.253
ip route 10.0.1.0 255.255.255.0 10.170.10.253
ip route 10.170.11.0 255.255.255.0 10.170.10.253
ip route 10.170.12.0 255.255.255.0 10.170.10.253
ip route 10.170.14.0 255.255.255.0 10.170.10.60
ip route 192.168.3.0 255.255.255.0 10.170.10.253
!
!
!
line con 0
line aux 0
line vty 0 4
password 7 03514
login
!
!
!
end
____ SOME OUTPUT MODIFIED_____
-----------------------------
now i hope u understand better my scenario.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide