I encountered situation where network behind inside segment cannot reach the dmz segment and a virtual ip is needed to be assigned in the inside segment for server in dmz segment. Such nat seems not work in PIX 6.3. Thanks in advance!
You mentioned that you were not able to reach the DMZ from the internal network; did you apply the proper NAT configuration before trying that (i.e. NAT and Global commands)?
Anyhow, mapping the DMZ address to an inside address in the way you mentioned should work. Try "debug icmp trace" and run an ICMP test after applying this static to verify how address translation works then let us know how things move with you.
But wouldn't it be dangerous to disable NATting like this, as NATting is still required between inside and outside? To which extent will the effect of this command be in terms of address translation on the other interfaces?
Login to the FXOS chassis manager.
Direct your browser to https://hostname/, and log-in using the user-name and password.
Go to Help > About and check the current version:
Check the current version availa...
We have configured the outside and inside Interface with official ipv6 adresses, set a default route on outside Interface to our router, we also have definied a rule , which also gets hits, to permit tcp from inside Interface to any6.
In Syslog I also se...