10-10-2003 04:23 PM - edited 03-09-2019 05:07 AM
Can I make a static network NAT using route-map ? I want to be able to choose which traffic gets NAT'd by the network NAT. It seems that although the route-map access-list is matched, the traffic still didn't get NAT'd.
10-11-2003 11:51 AM
this link may help, good luck
http://www.cisco.com/en/US/tech/tk648/tk361/technologies_tech_note09186a0080093fca.shtml
10-11-2003 10:01 PM
Hi,
Thanks for the response, but this link only give example on using route-map on ip nat inside or outside source route-map.
What I want to try is using route-map in ip nat inside source static network. I want to check if anyone have tried this and work because when I try this although the traffic has matched the route-map, the traffic still cannot be NAT'd
Thanks
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide