cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
243
Views
0
Helpful
1
Replies

Strange reboot of FWSM due to heavy logging?

cco1
Level 1
Level 1

Hi!

Another problem appeared to the FWSM:

When the logging settings (presumably the syslog settings) are too detailed (notifications or even higher), the FWSM suddenly reboots after 10-15 seconds. It only works, when almost all logging settings are set to warnings or lower.

Are there any special settings to be made, to prevent the FWSM to reboot on heavy (too detailed) logging?

Thanks.

Marco

1 Reply 1

Not applicable

You can use syslogging and set up a syslog server somewheres. There are free syslog server programs out there such as KIWI which you can download.

The following links discusses syslogging:

http://www.cisco.com/univercd/cc/td/doc/product/lan/cat6000/mod_icn/fwsm/fwsm_2_3/fwsm_cfg/monitor.htm

Try these links for more info:

http://www.cisco.com/en/US/products/hw/switches/ps708/products_module_configuration_guide_chapter09186a00802010d4.html#wp1149284

http://www.cisco.com/en/US/products/hw/modules/ps2706/products_qanda_item09186a00801e9e26.shtml

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: