We have the Cisco Video Surveillance Integrated Services Platform. I cant seem to enable the feature "activity detection".
I believe it supposed to appear under the alarms >recorder tab of the Stream Manager Configuration, but its not there.
All i see is the alarm for video loss, recording failure, raid failure. One of the six recorders doesnt have the raid failure. So i am thinking that these alarms has to be enabled, and i need all the help i can get where to find it.
By the way I am using the 5.1 version firmwares for all the encoders,decoders,recorders and their dsps.
Table of ContentsIntroductionVersion HistoryPossible Future
UpdatesDocuments PurposeNAT Operation in ASA 8.3+ SectionsRule Types
Network Object NATTwice NAT / Manual NATRule Types used per SectionNAT
Types used with Twice NAT / Manual NAT and Network Obje...
Table of Contents Introduction:This document describes details on how
NAT-T works. Background: ESP encrypts all critical information,
encapsulating the entire inner TCP/UDP datagram within an ESP header.
ESP is an IP protocol in the same sense that TCP an...