Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
New Member

TACACs and PPP

I have a 2620 with a 16 port async modeult for RAS dialin. I also have two T1 WIC's that I use to connect to a remote site (ppp multilinked). Can I setup the router to provide authentication for the PPP dialup users but not on the two T1's? I can't find docs on how to do this or seperate the two.

1 REPLY
Cisco Employee

Re: TACACs and PPP

I assume that you have TACACS server for PPP users authentication thru async interface..you can heve aaa scheme (list) like this

aaa authentication ppp ppp-users group tacacs+

Now under the async interface, enter the command

ppp authentication chap pap ppp-users

visit here for more information

http://www.cisco.com/warp/public/793/access_dial/security.html

Now, if you do need local authentication for T1 users then you need one more scheme like

aaa authentication ppp t1-users local

assign that t1-users scheme like same way under the T1 interfaces..

If you don't need authentication for T1 users at all, then don't configure the "ppp authentication" command under the interfaces.

89
Views
0
Helpful
1
Replies
CreatePlease to create content