Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Tacacs+ can it serve DNS , wins, domain name

I would like to serve to our dialup clients a DNS address, a wins200 address

and a Domain Name , can I use the tacacs server to do this, I have a Radius

server also that I can use if necessary. the clients are dialin through a 5300

router.

1 REPLY
Cisco Employee

Re: Tacacs+ can it serve DNS , wins, domain name

Yes, you can download WINS/DNS to your dialin clients from ACS using both TACACS/RADIUS.

For TACACS:-

You can specify DNS and WINS server IP addresses from the CSNT server on a per-user user basis or for a group of users by adding the following lines as custom attributes of PPP IP in the group setup.

dns-servers = 10.1.1.1 10.1.1.3

wins-servers = 10.1.1.5 10.1.1.16

For RADIUS:-

You can specify DNS and WINS server IP addresses from the CSNT server on a per-user user basis or for a group of users by adding the following lines under Cisco RADIUS Attributes and AV-pair in group setup.

ip:wins-server=123.1.1.1 123.1.1.2

ip:dns-servers=212.1.1.1 212.1.1.2

Check the following URL

http://www.cisco.com/warp/public/480/csntfaq.html#Q35

HTH

R/Yusuf

271
Views
0
Helpful
1
Replies
CreatePlease to create content