I'm using a terminal server to access the serial output from a device. I don't want to require a username and password when accessing one of the serial lines (it's just streaming output), but I want to use tacacs+ for authentication when accessing the vty. Any time I add "aaa new-model" it always starts asking for a username when I telnet to port 2015. Is there any way to get tacacs+ only on the vty/console?
I am glad that you figured out the solution to your own problem. (frequently the things that we learn the best are the things that we figure out on our own). Thanks for posting back to the thread and telling us how you solved this problem.
Table of ContentsIntroductionVersion HistoryPossible Future
UpdatesDocuments PurposeNAT Operation in ASA 8.3+ SectionsRule Types
Network Object NATTwice NAT / Manual NATRule Types used per SectionNAT
Types used with Twice NAT / Manual NAT and Network Obje...
Table of Contents Introduction:This document describes details on how
NAT-T works. Background: ESP encrypts all critical information,
encapsulating the entire inner TCP/UDP datagram within an ESP header.
ESP is an IP protocol in the same sense that TCP an...