Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Community Member

Telnet into ASA 5510 - no longer can do this

I have a ASA 5510 firewall Latest versions of

IOS and ASDM.

I am using hyperTerminal or Telnet and something has changed

on my firewall configuration.

I was able to get a full view of my ASA configuration

Top to bottom using these utilities - but no longer.

What changed and how can I fix it.

Thanks

1 REPLY

Re: Telnet into ASA 5510 - no longer can do this

console into the 5510 and take note of telnet access, it is very possible something changed on the hosts that used to access the asa like the IP address.

e.i, say you are accessing asa from inside hots ip 192.168.1.20

asa(config)#telnet 192.168.1.20 255.255.255.255 inside

or if you want to avoid being so granular in which hosts on a given interface can telnet to asa you can simply allow any.

e.i

asa(config)#telnet 0.0.0.0 0.0.0.0

HTH

Rgds

Jorge

961
Views
5
Helpful
1
Replies
CreatePlease to create content