Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
New Member

Telnet Session pix 506E

I have a problem with my Pix 506E : I can't connect by telnet session. Is there any option to reactivate it from the PDM ?

Thks

1 ACCEPTED SOLUTION

Accepted Solutions
Silver

Re: Telnet Session pix 506E

Yes, there is a way to enable Telnet access via PDM-

Cofniguration -> System Properties -> Administration -> Telnet

Here you can add the host IPs from where you can telnet and specify the interface where these clients are located.

Note: You cannot telnet to PIX firewall from outside/lowest security level interface.

Regards,

Vibhor.

2 REPLIES
Silver

Re: Telnet Session pix 506E

Yes, there is a way to enable Telnet access via PDM-

Cofniguration -> System Properties -> Administration -> Telnet

Here you can add the host IPs from where you can telnet and specify the interface where these clients are located.

Note: You cannot telnet to PIX firewall from outside/lowest security level interface.

Regards,

Vibhor.

New Member

Re: Telnet Session pix 506E

Thank you for your help, it is working now.

Musa Birkan

133
Views
0
Helpful
2
Replies
CreatePlease to create content