Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

telnet to a specific vty line

Hi,

is it possible to make a telnet connection to a specific vty line.

line vty 0 3

password cisco

!

line vty 4

password 123

If yes, how.

Thanks in advance

Joe

2 ACCEPTED SOLUTIONS

Accepted Solutions
Cisco Employee

Re: telnet to a specific vty line

There is no way to direct the telnet connection to the router to a specific vty ports. vty ports will be picked based on availability.

Let me know what is the goal behind that so that we can think for some way.

Re: telnet to a specific vty line

Actually, there is a way to do this.

line vty 4

password 7 04530E0A03

rotary 4

Will let you telnet to router on port 3004 which will be this line.

HTH, Erick

4 REPLIES
Cisco Employee

Re: telnet to a specific vty line

There is no way to direct the telnet connection to the router to a specific vty ports. vty ports will be picked based on availability.

Let me know what is the goal behind that so that we can think for some way.

New Member

Re: telnet to a specific vty line

Hi,

thanks for the answer.

Now i have configured "local" aaa with some privilege Level.

This works fine.

regards joe

Re: telnet to a specific vty line

Actually, there is a way to do this.

line vty 4

password 7 04530E0A03

rotary 4

Will let you telnet to router on port 3004 which will be this line.

HTH, Erick

New Member

Re: telnet to a specific vty line

Hi Erick,

this are very good news.

The best solution.

Thank you very much.

joe

1167
Views
5
Helpful
4
Replies
CreatePlease login to create content